Specifications

Setting up your player 2-3
Charging the
battery
The high performance lithium battery supplied with your player needs to be fully
charged before you use it. Your player’s built-in battery charger should fully charge
the battery in 4 hours to obtain the maximum playback time. If you are using two
batteries, both batteries should be fully charged in 8 hours.
How to charge the
battery
To charge your player’s battery, you should:
1. Insert the uncharged battery as shown in "Inserting the battery" on page 2-1.
2. Connect your player to an DC power outlet as shown in "Powering your player"
on page 2-2.
Your player will turn itself on.
Check the battery icon to see when the battery is fully charged.
Battery charge
status
Your player displays one of the following icons, depending on the battery’s charged
status or the power source (battery or DC power).
Icon Power State Notes
❍ your player is running from DC power only
❍ your player is running from battery power
only
❍ this battery state icon shows that the
battery is fully charged
❍ your player’s battery is good for
approximately 6 hours of continuous
playback
❍ if using two batteries, approximately
12 hours of continuous playback are
available
❍ your player’s battery is good for
approximately 3 hours of continuous
playback
❍ recharge the battery at the earliest
opportunity
❍ if using two batteries, approximately
6 hours of continuous playback are
available