User guide

Installing Your Multimedia Kit 10
8. When the destination path is
correct, choose Next. The
installation program copies the
files to your computer. The Device
Selection dialog appears.
9. Select the device that you have
connected to the CD-ROM drive.
❒ Choose “IDE Hard Disk
Controller Card” if you have
daisy-chained the CD-ROM
drive to the primary port on
your motherboard.
❒ Choose “Onboard IDE
Secondary Port” if the CD-ROM drive is connected to an available secondary IDE port on
your motherboard.
❒ Choose “Plug and Play Card” if you attached the drive to a Plug and Play interface card.
❒ Choose “Non-Plug and Play Card” if the drive is connected to a non-Plug and Play
interface card.
10. The Setup Complete dialog
appears.
11. Choose Finish to restart your
computer.