Technology Network Card User Manual
15
1. On the Server, open My Bluetooth Places by double-clicking the
icon on your desktop.
2. Right-click My Device and select Properties from the pop-up
menu.
3. In the Bluetooth Configuration Panel, select the Local Services
tab.
Double-click the Bluetooth Serial Port service to display its Service Properties
dialog box. The Service Properties dialog box displays the communications port
that the connection is using.
To close a Bluetooth serial port connection:
1. On the Client, open My Bluetooth Places by double-clicking the
icon on your desktop.
2. Select the device that is providing the Bluetooth Serial Port service.
3. Right-click Bluetooth Serial Port and then select Disconnect
Bluetooth Serial Port from the pop-up menu.
Another method to close the connection is from the Server. However, this is not
recommended:
1. On the Server, open My Bluetooth Places by double-clicking
the icon on your desktop.
2. Select My Device.
3. Right-click Bluetooth Serial Port and then select Stop to
close the service. The service must be re-started before it will
be available to remote devices.
Note: To restart connection, right-click Bluetooth Serial Port and
select Start from the pop-up menu.
Dial-up Networking
The Dial-up Networking service allows a Bluetooth client to use a modem that is physically
connected to a different Bluetooth device (acting as the server). Once a wireless connection
is established between the two devices, the client can use the server’s modem as if it were a
local device on the client.
Connection is initiated from the Client. To establish a Dial-up Networking session:
1. On the Client, open My Bluetooth Places by double-clicking
the icon on your desktop.
2. Select Entire Bluetooth Neighborhood.
3. Right-click anywhere except on a device name and then
select Refresh from the pop-up menu for an updated list.
4. Right-click the server that will provide the Dial-up Networking
Service and select Discover Available Services from the
pop-up menu to display an updated list of available services.
5. In My Bluetooth Places, double-click Dial-up Networking.
6. The Connect To dialog box opens, prompting you to fill in
your user name, password, and the phone number to be
dialed.
7. Click the Dial button. Selecting the Save password checkbox
will let you connect to the same number in the future without
having to type in all the connecting information.