Specifications

Using Software Applications 4-8
Configuring your
camera’s settings
To configure your camera’s settings, do the following:
1. Make sure that your camera is connected to your computer.
2. Click Camera, and then click Configuration.The Creative CardCam Config
dialog box appears as shown in Figure 4-4.
• File numbers are
automatically assigned
to all images taken.
They range from 0001
to 9999.
• Each image has a file
number that remains for
as long as the image
remains in the camera.
When the image is
deleted, the file number
is skipped.
• When the file counter is
reset, the file numbers
start from 0001 again.
By default, the Auto
Shutoff time is set to
‘Short’ (20 seconds).
Figure 4-4: Creative CardCam Config dialog box.
Deletes all images
in the camera
Locks the shutter when
there is insufficient light
Audio cues
enabled/disabled
Battery charge
level
Image size
1280 x 960 pixels
640 x 480 pixels
Auto Shutoff time
Short: 20 seconds
Long: 50 seconds
Reformats the
camera
Number of images
taken/number of
images available
File
number of
the current
image
taken
Refreshes
the
information
on this
dialog box
Resets the file
counter to zero
Closes this dialog box