User`s guide

Troubleshooting B-2
Connection to
the Internet
My DSL Router does not connect to the Internet.
You did not set up your DSL Router correctly.
Try the following:
❑ Be sure that if your DSL Router is connected to your computer through a hub, you are
using a crossed Ethernet cable.
Also, be sure that you have configured your DSL Router correctly. For more information,
see "Configuring your DSL Router" on page 4-1.
❑ If your computer is connected to your DSL Router using a USB cable, be sure that you
have installed the USB driver.
❑ Be sure that the power adapter is plugged in securely and the power is turned on.
❑ Be sure that the phone line from the telephone wall outlet is connected securely to the
LINE connector of your DSL Router.
❑ Be sure that you have subscribed with a Internet Service Provider.
❑ Be sure that the Ready LED is turned on.
❑ If you are required to specify your WAN IP addres s, be su re that you have typed the value s
for IP address, Subnet Mask, Gateway and DNS Server provided by your Internet Service
Provider correctly.