User`s guide

Configuring your DSL Router 4-13
Disconnecting
from the
Internet
When you reconnect your DSL Router to the Internet, always make sure that you
turn on your DSL Router before you turn on your computer. Wait at least 30 - 60
seconds for your DSL Router to connect to the Internet.
In PPPoA and
PPPoE Mode
If you are using PPPoA or PPPoE configurations for your DSL router, you can
disconnect from the Internet by turning off the main power supply to your DSL
Router.
Alternatively, you can disconnect from the Internet through your DSL Router’s
home page:
1. Click Status on the left pane and select Connection.
2. Click the Disconnect button on the right pane.
3. To reconnect to the Internet, click the Connect button.
In RFC 1483
Routed Mode
If you have chosen RFC 1483 Routed mode for your DSL Router, you can
disconnect from the Internet by turning off the main power supply to your DSL
Router.
Checking your
DSL Router’s
Status
The DSL Router web page allows you to view your DSL Router’s status, such as
your DSL Line status, PPP Connection status and WAN status. On the left
pane, place your cursor over the Status link to select the statistic you want to
view.
The DSL Router web page also enables you to perform the following tasks:
Diagnostic Test (Loopback test and Ping test), Firmware Upgrade, Reboot
Modem and Log Out. On the left pane, click the link of the task you want to
perform.