User`s guide

Configuring your DSL Router 4-9
RFC 1483 Bridged
IP Configuration
1. After connecting to your DSL Router’s home page, click Configuration on the
left pane and select System Settings.
2. When the window similar to Figure 4-12 appears, select Bridge in
Encapsulation Mode.
3. Type in the VPI and VCI values
provided by your Internet Service
Provider in their respective boxes.
4. Click the Next button.
5. In the web page that appears
(Figure 4-13), click the Next button.
Figure 4-12
DO NOT turn off the
computer or DSL
Router when your DSL
router is restarting.
Figure 4-13
If your DSL connection
is charged on the basis
of time online, turn off
your DSL Router when
it is not in use, to
avoid unnecessary
charges.