User`s guide

Configuring your DSL Router 4-3
Configuring
your DSL
Router
PPPoA/PPPoE
Configuration
1. After connecting to your DSL
Router’s home page, move your
mouse over Configuration on the
left pane and select System
Settings.
2. When the window similar to Figure
4-2 appears, select PPPoA or
PPPoE in the encapsulation mode.
3. Type in the VPI and VCI values
provided by your Internet Service
Provider in their respective boxes.
4. Click the Next button.
Figure 4-2
If your DSL connection
is charged on the basis
of time online, turn off
your DSL Router when
it is not in use, to
avoid unnecessary
charges.