User`s guide

Configuring your DSL Router 4-2
Connecting to
your DSL
Router’s Home
Page
Before proceeding, make sure that you have configured your Network Interface
Card or installed the USB device drivers successfully.
You need to connect to your DSL Router’s home page to configure your DSL
Router.
1. If your DSL Router is connected using
the Ethernet or USB port, the Link
LED will light up.
2. Start your web browser, for example,
Internet Explorer or Netscape
Communicator.
3. In the Address (for Internet
Explorer) or Location (for Netscape)
box, type http://192.168.1.1.
4. Press the Enter key on your
keyboard.
5. In the dialog box similar to Figure 4-1
appears, type admin in the User
name box and admin in the
Password box.
6. Click the Submit button.
Disable any proxy
server in use before
accessing the DSL
Router home page.
See "Disabling the
Proxy Server" on page
4-11.
Figure 4-1