User`s guide

Installing the USB Driver 3-1
Installing the USB Driver
Installing the
USB Driver
Before using your DSL Router, you need to install the USB driver.
In Windows XP 1. After you have set up your DSL Router, as described on page 1-3, turn on your
computer.
2. Insert the Installation CD into your CD-ROM drive. The disc supports Windows
Autoplay mode and starts running automatically. If the Autoplay window
appears, click the Yes button to accept the Software License Agreement.
3. Select the applications that you want to install, and then click the Next
button.
4. Follow the onscreen instructions.
5. When prompted, restart your computer.
If you are connecting
your DSL Router using
the Ethernet port, skip
this chapter and go to
"Configuring Your
Network Interface
Card" on page 2-1.
If you want to install
the applications later,
from the Autoplay
window, click the Exit
button and proceed to
step 6 to install the
USB drivers.