User`s guide

Configuring Your Network Interface Card 2-4
In Windows
Me/Windows
98 SE
1. After setting up your DSL Router, turn on your computer.
2. Click Start -> Settings -> Control
Panel.
3. When the dialog box similar to Figure
2-4 appears, double-click the Network
icon.
4. When the dialog box similar to Figure
2-5 appears, click the Configuration tab.
5. Click the adapter that has the name of your
Ethernet card, for example,
TCP/IP->Intel 8255x-based PCI
Ethernet Adapter (10/100).
6. Click the Properties button.
Figure 2-4
Figure 2-5