User`s guide

Installing your DSL Router 1-6
5. Connect the small round plug of the power adapter provided to the DSL
Router’s power connector and plug your power adapter into a power outlet.
6. Turn on the power supply.
7. If you have telephones and fax machines sharing the same phone line,
connect them to the telephone wall outlet or DSL modem phone port with
microfilters as shown below. The microfilters will help to ensure voice and data
quality.
Before using your DSL Router, you will need to install the USB driver. For detailed
instructions, refer to Chapter 3, "Installing the USB Driver".
Figure 1-6: Connecting a telephone to the telephone wall outlet
Telephone Wall
outlet
RJ-11
phone cable
Microfilter
Tele phon e