User`s guide

Installing your DSL Router 1-5
Using the USB
port
Use Figure 1-5 as a reference when following these instructions to set up your DSL
Router.
1. Connect the USB cable to the USB ports on your computer and DSL Router.
2. Locate a telephone wall outlet and unplug any telephone cable that is
connected to it.
3. Connect one end of the RJ-11 phone cable provided into the telephone wall
outlet.
4. Connect the other end into the DSL LINE port of your DSL Router.
DO NOT use the
Ethernet port on your
DSL Router if you are
using the USB port on
the same computer.
Figure 1-5: Setting up your DSL Router using the USB port
USB port
USB cable
Tele phon e
Wall outlet
Power adapter
Ethernet port
DSL LINE port
Power connector
Reset button
USB port
RJ-11 cables
Phone port
Microfilter