User`s guide

Installing your DSL Router 1-4
2. Locate a telephone wall outlet and unplug any telephone cable that is
connected to it.
3. Connect one end of the RJ-11 phone cable provided into the telephone wall
outlet.
4. Connect the other end into the DSL LINE port of your DSL Router.
5. Connect the small round plug of the power adapter provided to the DSL
Router’s power connector and plug your power adapter into a power outlet.
6. Turn on the power supply.
7. If you have telephones and fax machines sharing the same phone line,
connect them to the telephone wall outlet or DSL LINE port with microfilters as
shown below. The microfilters will help to ensure voice and data quality.
8. Before using your DSL Router, you will need to configure your Network
Interface Card. For detailed instructions, refer to Chapter 2, "Configuring Your
Network Interface Card".
Figure 1-4: Connecting a telephone to the telephone wall outlet
Telephone Wall
outlet
RJ-11
phone cable
Microfilter
Tele pho ne