User manual

User Manual for Multi-parameter Patient Monitor
2
waveforms;
 Resistance against defibrillator and electrosurgical unit interference and high safety level,
can be used along with cardiac pacemaker;
 Blood pressure may be measured in the mode of “adult/infant/neonate”, which may be
selected via the menu, to better suit the adult, pediatric and neonatal patient;
 Built-in printer to output waveforms and text;
1.2 Product Name and Model
Product name: Multi-parameter Patient Monitor
Model: UP-8000
1.3 Scope of Application
UP-8000 Multi-parameter Patient Monitor is multifunctional equipment designed for monitoring the
comprehensive physiological parameters of patient. With the functions of real-time displaying and recording of
patient’s EEG, CSI, BS%, ECG, respiratory value, body temperature value, non-invasive blood pressure value,
pulse oxygen saturation value, pulse rate and other physiological parameters, it allows comprehensive analysis of
physiological and pathological conditions.
This equipment is intended for use in major, medium and small-sized hospitals, clinics, and health practitioner’s
office. The operation should be performed by qualified professionals only.
1.4 Requirement of Operating Environment and Installation
1. This equipment should be situated in a place protected against direct sunlight, so as to prevent
overheating inside the equipment.
2. Do not use this device in an environment with toxic or inflammable gas.
3. This device should be fixed on a stand or flat platforms, so as to prevent possible shock.
4. Do not use with any equipment other than those expressly permitted in these instructions.
5. When using this device with electrosurgical equipment, the user (doctor or nurse) should pay attention to
the safety of patient.
6. Make sure that the equal-potential grounding terminal is grounded correctly.
7. Do not use mobile phone nearby, so as to avoid strong radiant field interference.
1.5 Normal Working Environment
1. Ambient temperature range: 10°C ~40°C
2. Relative humidity: 30%~75%
3. Atmospheric pressure: 70.0kPa ~106.0kPa
4. Power supply: a.c.100~250V
5. Power frequency: 50/60Hz