User manual
User Manual for Multi-parameter Patient Monitor
59
Other Terms and Messages
“Cuff error”
—cuff is not wrapped correctly, or is not connected
“Air leak”
—Air moving part, tube or the cuff leak air.
“Pressure error”
—Unstable cuff pressure or tangled cuff tubing
“Signal weak”
—Very weak signal because of the cuff, or the patient has very weak pulse
“Over extent”
—The measurement range exceeds 255 mmHg (Neonate/Infant over 135
mmHg)
“Over motion”
—The repeated measurement due to moving, excessive noise during the
stepping inflation and measuring pressure and pulse, e.g. during patient
shaking motion
“Signal overflow”
—Blood pressure amplifier overflow due to excessive movement
“Leak in gas run”
—Leaking during the pneumatic device testing
“System error”
—Abnormal condition of CPU, such as register overflow, divided by zero
“Adult”
—The blood pressure measuring now is in adult mode. In this case, it is not
allowed to monitoring infant. Otherwise, there may be serious danger to
the infant monitored.
“Infant” —The blood pressure module is now worked in infant measuring mode.
“PROBE OFF” —SpO
2
probe fell off
“LEADS OFF”
—The ECG electrodes or cable fell off
“LEARNING”
—Learning arrhythmia for 15 seconds
“DEMO” —The monitor is displaying the demo waveforms, which are generated by
the monitor.