User manual

User Manual for Multi-parameter Patient Monitor

5.4 TEMP Monitoring

1. TEMP measuring range: 25.0 ℃~45.0 ℃

2. TEMP measuring accuracy: ±0.2℃

3. TEMP response time: ≤150s

5.5 NIBP Monitoring

1. Measuring method: Automatic measurement by intelligent oscillating method.

2. Cuff inflation time: <30 seconds (typical adult cuff)

3. Air release time during measurement: < 90 seconds on the average

4. Air release time while the measurement is canceled: <2 seconds (typical adult cuff)

5. Initial cuff inflation pressure: Adult and infant mode: 180mmHg, Neonate mode: 120mmHg.

6. Overpressure protection limit: Adult and infant mode: 300 mmHg, Neonate mode: 150 mmHg.

7. Blood pressure measuring range:

Systolic pressure: Adult and infant: 25mmH~265mmHg; Neonate: 25mmHg~135mmHg

Diastolic pressure: Adult and infant: 12mmHg~220mmHg; Neonate: 12mmHg~110mmHg

Mean arterial pressure: Adult and infant: 18mmHg~245mmHg; Neonate: 18mmHg~120 mmHg

8. Measurement accuracy： Systolic ±10%

Diastolic ±10%

MAP ±10%

9. Measurement mode: Manual, Auto, STAT

Automatic measuring intervals:1~240min; interval tolerance: <10s

5.6 SpO

& Pulse Rate Monitoring

1. Transducer: dual-wave length LED

2. SpO

measuring range: 35%~100%

3. Low perfusion capability: as low as 0.4%

4. SpO

display accuracy:

(1) 75%~99% ±2%

(2) 50%~75% ±3%

5. Pulse rate measuring range: 30bpm~250bpm

6. Pulse rate measuring accuracy: ±2bpm

5.7 Recorded Data

1. Sensitivity selection tolerance: ≤5%

2. Recording speed: 25mm/s

3. Recording speed accuracy: ≤5%