User manual

User Manual for Multi-parameter Patient Monitor
39
4.9.8 Resume Default
System parameters default key. Move the cursor to “Default”, press the Navigation knob for 2seconds, all the
value of parameters will resume default except the setting of language and printer type.
4.10 Color Settings screen
In the mode selection screen, move the gray cursor to “Color” and press the Navigation Knob to enter color
setting screen, shown in Figure 4.37.
Figure 4.37 Color Settings
In this screen, rotate the knob to choose the color, press and rotate it to change the color. When the appropriate
color is chosen press the knob again to save it.
Press the Exit to exit from this color settings screen.
☞ The printing is determined by the option of CSM item on Print Setup Screen if you press the Print Key, refer
to Chapter 4.9.2 Printer Parameter Settings for details.
4.11 File/Archive Management Screen
Figure 4.38 Document Management Screen
The document/archive management screen can be used to manage information about the patient. In the screen, the
operator can enter and modify the patient ID, name, Bed number, Sex, and Age. The operator can also choose to
save the patient data in the permanent storage. The screen is shown in Figure 4.38.