User manual

User Manual for Multi-parameter Patient Monitor
32
During waveform recall, the system not only displays the current recalled waveform, but also displays the lead
status, gain and filter type of the waveform and time, as shown in Figure 4.25 Waveform Recall.
HIST: press the key to shift between the history key and current key. Press HIST and the recall list on the left
displays the history data list. Press the Current, the recall list on the left side displays the current one. When
entering the recall screen, the system defaults the current one.
ECG Record: up to 10 hours the latest ECG waveform and other related information;
CSM Record: up to 24 hours the latest ECG waveform record;
The leads, gain etc. parameter values saved in ECG is in accordance with system parameter settings.
Delete: press this key, and the selected record in the recall list becomes green. Rotate the Navigation Knob to
choose the reviewed record that is to be detected, press it, release it 2 seconds later, and then the record is deleted.
The current record cannot be deleted, or else the system will exit from deleting status automatically.
Exit: press this key to return to the system setup menu.
☞ If on ECG waveform recall screen, press Print Key to print the recalled data list. If a piece of record is
chosen, press Print Key to print the current ECG waveform and the recalled waveform on the Waveform
Recall Screen.
☞ If on CSI and EEG waveform recall screen, press Print Key to print the recalled data list. If a piece of
record is chosen, press Print Key to print CSI recalled trend or CSM recalled Waveform which is
determinded by the option of of CSM item on Print Setup Screen. If option of of CSM item on Print Setup
Screen is off, no data shall be printed.
4.8 VPC Screen
Move the gray cursor to “VPC” and press Navigation Knob to enter VPC screen, shown in Figure 4.27.
Figure 4.27 VPC Screen