User manual

User Manual for Multi-parameter Patient Monitor
27
4.6 Graphic Trend Screen
4.6.1 Screen Description
Move the gray cursor to “TREND” in the mode selection screen, and press Navigation Knob to enter into trend
screen, displays in the same position shown as Figure 4.15.
Finger 4.15 Trend Menu Screen
This is the graphic trend selection screen, i.e. Trend Menu screen.
If you want to enter one of the trend graphs, the procedures are: rotate the knob, move the cursor to one of the
parameter. For example, from the left to right, we are entering “Heart Rate”, “ST Segment”, “Temperature”,
“NIBP”, “SpO
2
”, “Respiration Rate”, “CSI” trend graphs. Their screens are described in the following figures.
Figure 4.16 Heart Rate Trend
Figure 4.16 is the ECG trend graph. There are 3 options on the right of the graph, as described below.
The “12h” on the top shows the trend graph time. Move the cursor to the trend time, press the knob and rotate it,
and the trend graph time will change to 24h or 96h, which changes the horizontal coordinates to be 24 hours or 96
hours. The corresponding trend graph also changes to 24 - hour trend or 96- hour trend.
After choosing “OBSE”, the trend graph display a triangle and a vertical line, a moving ruler mark that can be
moved by rotating the knob. As shown in the figure, when you move the mark to a specific point, the data area
below the graph will display the time, and its corresponding heart rate, respiration rate, SpO
2
, temperature Ⅰ,
temperature Ⅱ
. W hen r
rule is that the initial step is 1, after moving it towards the same direction 5 times, the interval becomes 5, and
with 5 more steps the interval becomes 10, then 20 and 40. No matter what the interval is, as long as you move