User manual

User Manual for Multi-parameter Patient Monitor
26
4.4.1 Screen Description
In the SpO
2
list title bar, the front color of SpO
2
, PR is the same with SpO
2
parameters’ and other front color is
white.
The operation on the data listing is simple. Using the Navigation Knob allows the user to scroll the list up and
down. When rotating the knob anti-clockwise, the list scrolls upward (i.e. use the ↑ arrow to scroll the data). When
rotating knob clockwise, the list scrolls down (i.e. use the ↓ arrow to scroll the data). Please note that when the
groups of data are less than 11, the Navigation Knob can not be used to scroll up or down the listing.
Up to 15 groups of the latest data can be printed each time when printing SpO
2
list and the printing data is the
SpO
2
list on current screen. Rotate the knob to display the next screen and then press the Print key to perform
printing, the next page of SpO
2
list will be printed.
All the parameters in the SpO
2
data list are corresponding to the time when the SpO
2
measurements were taken.
There is only one record every 4 seconds.
☞ Press the Print Key to print SpO
2
list.
4.5 Blood Pressure Data List Screen
Move the gray cursor to NIBP List in the mode selection screen, and press Navigation Knob to enter into NIBP
data list screen, displays in the same position shown as Figure 4.14.
Figure 4.14 NIBP List
4.5.1 Screen Description
The NIBP list screen is similar with the SpO
2
data listing screen. The difference is the title bar colors. In the NIBP
list title bar, the front color of NIBP is the same with NIBP
parameters’ and other front color is white.
All the parameters in the NIBP list are corresponding to the time when the NIBP measurements were taken. When
the NIBP measurement is taken successfully each time, the NIBP list will be updated, and the latest measured data
is in front of the list.
The all operations is similar to the SpO
2
data listing screen, please refer to the previous chapters.
☞ Press the Print Key to print NIBP list.