User manual
User Manual for Multi-parameter Patient Monitor
21
Waveform area
1
st
Waveform: The first waveform is ECG waveform for lead II.
Any lead can be selected via “ECG
Lead” key.
2
nd
Waveform: the waveform for 1
st
channel.
3
rd
waveform: SpO2 waveform
4
th
waveform: respiration waveform
5
th
waveform: CSM waveform, the latest 4 minutes CSM trend waveform. This area is operation area,
detailed operation see chapter 4.3 Mode Selection Screen.
Data area
Figure 4.4 Heart Rate Data Area
“
HR
”
：
The currently displayed heart rate. The 60 on the right side is the heart rate measured.
“
bpm
”
：
The heart rate unit, bpm = beat per minute.
“
”
：
The heart beating symbol. Its flashing corresponds to the R wave of the ECG waveform. The
speed is the same with the heart rate.
“
ST+0.098mv
”: The measured milli-volts value during ST measurement.
Figure 4.5 Blood Pressure Data Area
“NIBP”:
The blood pressure type labels and the measured value.
“08:49”:
The time of NIBP measuring
“Adult”:
NIBP measurement mode. The subject is adult.
“mmHg”: Blood pressure value unit: mmHg/kPa
“00:01:34”
：
The NIBP measurement mode.