User manual

User Manual for Multi-parameter Patient Monitor
12
Info:
 Serial number
 Firmware version
 CSI version
 AD version
Link:
 - indicates no CSM Link connected.
 If CSM Link connected the CSM Link serial number and software version will be shown.
Log:
 Serial number.
 #1 total no. of CSM sessions.
 #2 total no. running hours
3.2.4 Events
Pressing the Set Event key (6) results in a continuously numbered event with no type description.
Pressing the Event Type key brings up the following selection menu:
The following option can be selected: Induction, Intubation, Maintenance, Surgery, Injection, Note, End
Maintenance, and Movement.
When the desired option has been selected, press the Set Event key (6) to confirm. If no selection is made
within 5 seconds the system returns to the current Display Mode. Only the event numbers visible on Display
Mode B. Event names will only be recorded when using the CSM Link option.