User`s guide

Installing Hardware 2-4

Step 4:

Activate the

wireless

desktop

devices

1. Press the Connect button on the RF receiver, as shown in Figure 2-6.

2. Press the Connect button on the mouse. The Communication LED indicator on the RF receiver

blinks green for about 5 sec.

3. Press the Connect button on the keyboard. The Communication LED indicator on the RF receiver

blinks green for about 5 sec.

To install drivers, refer to "Installing Software" on page 3-1.

Step 5: Test the

keyboard and

mouse

Move the mouse cursor or press a key on the keyboard to test that the keyboard and mouse are connected.

If nothing happens, repeat Step 4.

• Make sure that the

keyboard and mouse

are within 1.8 meters

(6 feet) of the RF

Receiver.

• Press the Connect

buttons on each of your

Desktop Wireless 6000

devices, as shown in

Step 4, each time you

insert batteries.

• Make sure you press

the Connect buttons

on the keyboard and

mouse within 10 sec

after you press the

Connect button on the

RF Receiver.

Figure 2-6: Activating the Creative keyboard and mouse