User guide

2. In the My Computer window, double-click the Creative
Banshee icon.
If the installation program does not run, double-click the
Win95/Win98 folder icon followed by the Setup icon.
3. Follow the instructions on the screen to complete the
installation.
Creative SoftMPEG
Creative SoftMPEG launches and quits immediately without
giving any error messages
This is probably due to the application resource DLL file
MPGRS32S.DLL being missing from the application directory.
Try locating the file and copying it to the same directory as the
application. If you cannot find the file in your system, you will need to
reinstall the application.
Problems adjusting the volume
If there is no effect when you adjust the volume:
! Check that the sound card supports the device.
!
Check that the audio cable is properly connected from the
CD-ROM drive to the sound card.
! Check that the speakers are properly connected to the sound
card.
!
Increase the volume output to the speakers by turning the
volume knob on the sound card (if present).
! If you have more than one sound card, check that you are
controlling the correct one.
!
Launch the Mixer and check that the Mixer mute control is not
enabled.
Error messages:
• OLE 2.0 initialization failed. Make sure that the OLE libraries
are the correct version.
Cause
Creative SoftMPEG supports OLE 2.0 Automation and
requires the OLE libraries to run.
Action
Try running the application again. If it fails again, the OLE
libraries in your system are not the correct version or they
are missing. Try installing the application again.