User guide

2. Lower your monitor’s resolution.
For the resolutions supported by your monitor, refer to its manual.
Monitor display exhibits pixel drop (that is, pixels, usually white in color,
appear on the screen) or other abnormal behavior.
The settings that you have selected for your graphics card may be
incompatible with one or more games or applications that you are
running.
Use the factory default settings.
1. Right-click your desktop, and then click Properties on the
shortcut menu.
2. In the Display Properties dialog, click the BlasterControl tab.
3. On the BlasterControl tab page, click the Advanced icon.
4. Click the Factory Default button.
Beeping Sounds During System Startup
When the system is starting up, there is a series of prolonged beeps.
Your 3D Blaster Banshee card may not be firmly inserted into the
expansion slot.
Ensure that the gold-striped bus connector of the graphics card is
properly inserted into the expansion slot. Ensure this by pressing the
card gently and evenly into the slot. Alternatively, remove the card and
re-insert it.
Problems Installing Software
In Windows 95 or Windows 98, the installation program for BlasterControl
and SoftMPEG does not run automatically after you have inserted the
installation CD into your drive.
The AutoPlay feature in your Windows 95 or Windows 98 system is not
enabled.
Install the software from the CD:
1. Double-click the My Computer icon on your Windows 95 or
Windows 98 desktop