User guide

Setting Up Your 3D Blaster Banshee 1-2
3. Remove the cover from your computer.
If you are replacing an existing VGA card with 3D Blaster
Banshee, remove the existing VGA card.
4. Locate a free PCI expansion
slot for your 3D Blaster
Banshee. The relative
length and position of the
PCI expansion slots are
shown in the figure.
PCI systems usually give
slot 1 top priority. For best performance and compatibility,
place the 3D Blaster Banshee into slot 1 if possible. See your
computer’s manual for the location of slot 1.
5. Remove the metal plate from the expansion slot. Keep the
screw and the metal plate in case you need them later.
6. Align the 3D Blaster
Banshee’s PCI connector with
the free PCI expansion slot
and insert the card into the
slot. Ensure that the card’s
tabs fit firmly in the PCI
expansion slot.
Do not force the 3D Blaster Banshee into place. If it does not
fit properly, remove it and try again.
7. Secure the card to the expansion slot with a screw.
8. Replace your computer cover.
AGP slot
PCI slot
ISA slot
2. Fasten the card to the
slot with a screw.
1. Insert the
card into
the slot.