Product guide

Product Guide 25
Problems Using
Software
When you restart Windows, one of the following error messages appears:
“BlasterControl will only work on Creative graphics product drivers.
Do you want BlasterControl to be loaded the next time you start Windows?”
“BlasterControl will only work on Creative graphics product drivers.”
Cause 3D Blaster Savage4 drivers, required by BlasterControl, may have been replaced
by other drivers when you installed DirectX applications.
Solution Re-install or revert to the 3D Blaster Savage4 drivers.
To revert to the drivers:
1. Right-click your desktop, and then click Properties on the shortcut menu.
2. In the Display Properties dialog box, click the Settings tab, and then click
the Change Display Type button or the Advanced Properties button.
3. In the Adapter Type group box or on the Adapter tabbed page, click the
Change button.
4. In the Select Device dialog box, click 3D Blaster Savage4, and then click the
OK button.
5. In the Insert Disk message box, click the OK button without inserting
any CD.
6. If 3D Blaster Savage4 drivers and later versions of DirectX drivers are already
installed, click the Skip File button until the Adapter Type group box or the
Adapter tabbed page appears.
7. Click the two Close buttons to close the Display Properties dialog box.
8. When prompted to restart your system, click the Ye s button.
After you have restarted your system, the newer DirectX drivers will work
with the latest 3D Blaster Savage4 drivers.