Product guide

20 3D Blaster™ Savage 4
Troubleshooting
System Hangs, Blank
Screen or Corrupted
Display
After installing 3D Blaster Savage4 and starting your system, the monitor
displays a blank screen.
Solutions Try the following:
Switch off your system and wait a while before switching it on again.
Verify that any built-in VGA on your motherboard is disabled and that you
have removed any other video display card from your system.
Ensure that your 3D Blaster Savage4 card’s bus connector is fully inserted
into the expansion slot. Ensure this by pressing it gently and evenly into the
slot.
Verify that the pins of your monitor’s VGA Input connector are not bent and
that the connector is properly connected to the VGA Out connector of
3D Blaster Savage4.