Product guide

Product Guide 9
2. When a dialog box similar to Figure 7 appears,
ensure that the Display a list of all the drivers
in a specific location, so you can select the
driver you want option is selected.
3. Click the Next button.
4. Insert the 3D Blaster Savage4 CD into your
CD-ROM drive.
5. When a dialog box similar to Figure 8 appears,
click the Have Disk button.
6. In the Install From Disk dialog box, type
D:\WINDOWS (where D: represents your
CD-ROM drive) and click the OK button.
If you are installing Savage4 as a second or
subsequent card to make use of Windows 98’s
multi-monitor capability, you will see an
Update Driver Warning message telling you
that the driver you have selected may not work
correctly. You
must
click the Yes button to
confirm that you want to use the selected
driver. Otherwise, the system will install the wrong driver and will not recognize the card as
a Savage4 card (for details, see “Windows 98 Multi-Monitor Display Problems” on
page 21).
Figure 7: Selecting the
Display a list of all the
drivers in a specific location, so you can
select the driver you want
option.
Figure 8: Clicking the
Have Disk
button.