Installation guide

3D Blaster RIVA TNT2 PCI Installation Guide 2
The 3D Blaster RIVA TNT2 PCI provides outstanding 2D and video acceleration as well and
also supports software DVD decoders through hardware color and pixel format conversion.
Before You Begin
Minimum System
Requirements
❑ IBM
®
PC 100% compatible
❑ Genuine Intel Pentium II, AMD-K6 processor or higher, operating at 233MHz or faster.
❑ 32 MB system memory
❑ 10 MB of available disk space for full installation
❑ VGA, multi-frequency monitor
❑ CD-ROM drive installed
❑ Windows 95, Windows 98, Windows NT 4.0 (with Service Pack 5), or Windows 2000
Model and Serial
Numbers
Your card’s model and serial numbers can be found at the back of the card. We recommend
that you record the model and serial number below. This information will be useful in the
event that you need to contact our Technical Support staff for troubleshooting or your dealer
for warranty service.
Read me File
The README file on the CD-ROM contains information not available at the time of printing.
Read it before installing the card.
Updating Drivers
To download the latest drivers for 3D Blaster RIVA TNT2 PCI, visit Creative’s Web site at
www.creativehelp.com
3D Blaster RIVA TNT2 PCI
Model Number
Serial Number