Product guide

2 3D Blaster™ RIVA TNT2™ M64
Serial and Model
Numbers
Your card’s serial and model numbers can be found at the back of the card. We recommend
that you record the serial and model number below.
Before You
Begin
The README file on the CD-ROM contains information not available at the time of printing.
Read the file before you continue. In addition, read the following:
❑ Minimum System Requirements
❑ Updating Drivers
Minimum System
Requirements
❑ IBM
®
PC 100% compatible
❑ Genuine Intel Pentium II, Pentium III, AMD-K6, AMD-K6-2 or AMD-K6-3 processor
at 233MHz or higher for best performance, 350MHz or above is recommended.
❑ 32 MB RAM
❑ 15 MB free hard disk space
❑ Vacant 32-bit AGP 1.0 expansion slot for 3D Blaster RIVA TNT2 M64
❑ VGA monitor
❑ CD-ROM drive installed
❑ Windows 95, Windows 98, Windows NT 4.0 (with Service Pack 3).
Updating Drivers
To download the latest drivers for 3D Blaster RIVA TNT2 M64, visit Creative’s Web site
(http://www.cle.creaf.com).
Table 1: Serial numbers and model numbers.
Hardware Product Codes Numbers
3D Blaster RIVA TNT2 M64
Serial Number
Model Number