User guide

RECORD Utility 7-3
You need to take note of the following when using RECORD:
q If you enter RECORD without any parameters, the online
description for using RECORD appears.
q If you did not specify the recording mode, sampling rate and
sample size, the sound will be recorded in mono 8–bit wave
file format with 11025 Hz sampling rate.
q If you want to stop the recording, press <Esc>.
q The recording will stop when the disk is full.
q A new file will be created or an existing file will be
overwritten for recording.
Using RECORD
The following are some examples of how you can record sound files
in DOS:
q To record from CD into a sound file (SONG.VOC) in .VOC
format:
1. Play your CD in the background.
2. Type RECORD SONG.VOC /A:CD and press <Enter>.
q To record a sound file without displaying the recording
information:
1. Type RECORD SONG.VOC /A:CD /Q and press <Enter>.
q To record a stereo sound file from a Line-in source in .WAV
format with MULAW compression:
1. Type RECORD SONG.WAV /A:LINE /M:STEREO
/C:MULAW and press <Enter>.