Specifications

6-4 DSP Commands
The commands below are only available on DSP version 3.xx.
Category Cmd# Description
Stereo control A0h Set input mode to mono
A8h Set input mode to stereo
The commands below are only available on DSP version 4.xx.
Category Cmd# Description
Digitized sound I/O 41h Set output sampling rate
sampling rate 42h Set input sampling rate
8-bit DMA mode digitized
sound I/O
C
x
h Program 8-bit DMA mode sound I/O
16-bit DMA mode digitized B
x
h Program 16-bit DMA mode sound I/O
sound I/O D5h Pause 16-bit DMA mode sound I/O
D6h Continue 16-bit DMA mode sound I/O
D9h Exit 16-bit auto-init DMA mode sound I/O