Specifications

DSP Commands 6-15
41h
Set digitized sound output sampling rate
Output 41h, wSamplingRate.HighByte, wSamplingRate.LowByte
Remarks Valid sampling rates range from 5000 to 45 000 Hz inclusive.
Unlike the Time Constant, there is no need to pre-multiply the sampling rate by two
before programming the sampling rate for stereo digitized sound I/O.
See Also command 40h, Set digitized sound transfer Time Constant
command 42h, Set digitized sound input sampling rate
Available
1.xx 2.00 2.01+ 3.xx 4.xx
9
42h
Set digitized sound input sampling rate
Output 42h, wSamplingRate.HighByte, wSamplingRate.LowByte
Remarks Refer to command 41h.
See Also command 40h, Set digitized sound transfer Time Constant
Available
1.xx 2.00 2.01+ 3.xx 4.xx
9