User's Manual

20
Date of Origin – 02/01/08
CONTROL BOX OPERATION, WIRELESS OPERATION
1. Turn on Master Disconnect Switch in the tractor.
2. Power up Control Box using transmitter. Open transmitter and Push “MODE” button to select
the “Front Hopper” Mode (First two lights flashing).
3. Push and hold the “Open and Close” buttons at the same time for 3 seconds or until control
box light comes on to indicate the control box is activated.
4. Select button to perform the required operations for the front hopper.
5. To use the rear hopper, push “MODE” button to select Rear Hopper (First three lights flashing).
6. Select button to perform the required operations for the rear hopper.
7. Power off Control Box when finished. (Push “MODE” button to select “Front Hopper” Mode
(First two lights flashing). Hold the “Open and Close” buttons on the transmitter for 3 seconds
or until control box light goes off.
Button