User's Manual Part 4
92
Maintenance
Front Fork/Suspension Inspection
1. Place the motorcycle on the sidestand and inspect the
front forks. If fork oil is present on the outer tube, do not
ride the motorcycle. See your dealer for service before
operating. If fork oil is present around the fork seals or
inner tubes, replace the fork seals.
2. Clean the fork tubes to remove bugs, tar or buildup
which may cause seal wear or leakage. Inspect the outer
surfaces of the inner fork tubes for scratches or damage
from foreign objects.
3. Straddle the motorcycle and bring it to the fully upright
position. Apply the front brake and push downward
(hard) on the handlebars several times. The front
suspension should operate smoothly and quietly.
4. Fork oil condition and level affects front suspension
performance and internal component wear. Replace
fork oil at the recommended intervals. Special tools are
required to perform this procedure. See the INDIAN
MOTORCYCLE Service Manual or an authorized INDIAN
MOTORCYCLE dealer.
Fork Inner
Tube
Fork Seal
Fork Outer
Tube