User's Manual Part 3

51
Instruments, Features and Controls
Saddlebags
Hard Bag Removal
1. Unlock the electric
saddlebag locks (if
equipped).
Tip: The provided key can also be
used in the latch release buttons
to manually unlock the
saddlebag lids.
2. Remove the side cover.
3. Disconnect the saddlebag
lock electrical wiring near
the seat.
4. Press the lid latch release
button and lift the saddlebag
lid.
5. Flip the two quick-release
latches upward.
6. Tilt the saddlebag away from
the frame of the vehicle to
remove it.
7. To reinstall, place the hard bag in a fully seated position
on the muffler.
NOTICE: To prevent damage to components, always make sure
saddlebags are fully seated onto the muffler before
engaging the latches.
8. Make sure the rubber bushings on the latch pins are
fully engaged in the spools. Engage the quick-release
latches and flip them fully downward.
9. Reconnect the electrical wiring.
10. Reinstall the side cover, using care to avoid damaging
electrical wires.
Electrical Connection
Quick-Release Latch
Bushing
Latch Pin
Spool