User's Manual Part 2

29
Instruments, Features and Controls
Instrument Cluster (CHIEF)
Multi-Function Display (MFD)
The power switch must be ON to access the MFD. Use the
mode switches to toggle through the modes of the multi-
function display and to change settings in the display.
Odometer
The odometer displays total distance traveled.
Trip Odometers
The trip odometers (Trip 1 and Trip 2) display total distance
traveled since being reset. To reset a trip odometer, toggle
to the trip odometer, then press and hold the LEFT-TOGGLE
switch until the trip odometer resets to zero.
Engine Speed
Engine speed displays in revolutions per minute (RPM).
DC Voltage
The volt meter displays battery voltage. If the engine is not
running, approximate battery voltage displays. If the engine
is running, approximate charging voltage displays.
Gear Position
Gear position displays at all times while the engine is
running, unless a fault occurs with the gear position sensor.
Temperature
The temperature area displays ambient air temperature.
Fuel Range
The fuel range displays the distance the motorcycle can
travel on the remaining fuel in the fuel tank.
Average Fuel Economy
Average Fuel Economy displays as of the last time the mode
was reset. To reset, press and hold LEFT-TOGGLE while
viewing the fuel economy display.
Modes Available
Odometer Engine Speed
Trip Odometer 1 Average Fuel Economy
Trip Odometer 2 DC Voltage
Clock Ambient Air Temperature
Gear Indicator Fuel Range
LEFT-TOGGLE
Clutch Lever