User's Manual

ADDICT v3.0.1 User Manual DALI Functionality
©2017 All rights reserved - 32 -
If the Send all to PC menu item is selected, the ADDICT
®
will transmit all the recorded and stored
packet data via the PC communications link to a PC (or any device capable of receiving RS-232
serial data).
The following is an example of what is transmitted by Send all to PC:
#ADDICT 1.0 Sniffed packet data
#Last
15.91s 0191 M>A00 Query Ballast
15.96s 0391 M>A01 Query Ballast
16.01s 0591 M>A02 Query Ballast
16.06s 0791 M>A03 Query Ballast
16.07s FF
16.10s 0799 M>A03 Query Dev. Type
16.11s 00
#Alpha
5.39s A3FF SPEC. 255>DTR
5.43s FF80 M>ALL Store DTR> Address
5.47s FF80 M>ALL Store DTR> Address
5.50s A3FF SPEC. 255>DTR
5.54s FF80 M>ALL Store DTR> Address
5.57s FF80 M>ALL Store DTR> Address
5.61s A100 SPEC. Terminate
5.65s A100 SPEC. Terminate
5.80s A500 SPEC. Init. ALL
5.84s A500 SPEC. Init. ALL
5.99s A700 SPEC. Randomise
6.02s A700 SPEC. Randomise
6.18s FF06 M>ALL Minimum
6.33s B5FF SPEC. 255>Search Addr. Low
6.37s B3FF SPEC. 255>Search Addr. Mid
6.40s B1FF SPEC. 255>Search Addr. High
6.44s A900 SPEC. Compare
6.49s A900 SPEC. Compare
6.54s B5FF SPEC. 255>Search Addr. Low
6.58s B3FF SPEC. 255>Search Addr. Mid
6.62s B1FF SPEC. 255>Search Addr. High
6.65s A900 SPEC. Compare
6.70s A900 SPEC. Compare
6.76s B5FF SPEC. 255>Search Addr. Low
6.79s B3FF SPEC. 255>Search Addr. Mid
6.83s B1FF SPEC. 255>Search Addr. High
6.87s A900 SPEC. Compare
6.92s A900 SPEC. Compare
6.97s A100 SPEC. Terminate
7.00s A100 SPEC. Terminate
#Beta
No packets
The time stamp indicates how many seconds after sniffing was started that the packet was
detected, and that is followed by the 2-bytes of raw hexadecimal data for commands or 1-byte
of data for replies. Following the raw data for commands, as per the example above, is a
description of what that command is (same as what is displayed when displaying the sniffed
packets on the ADDICT
®
).
For 3-byte e-DALI commands, only 3-bytes of raw hexadecimal is transmitted with no
description as the ADDICT cannot know manufacturer-specific E-DALI 3-byte commands (OEMs
wanting to add this to the ADDICT for their products should contact Creative Lighting).