User's Manual

Result: No visible damage and no breakage in each wire.
Item 7.3: Drop Shock with Bare Unit
Condition: Drop the unit from a height of 76cm from the floor
Testing method: drop the unit on top, bottom and 4 side of the unit ( 1 time for each side).
Result:The unit function properly without any mechanical failure.
Item 7.4: Drop Shock in Gift box
Condition: Unit have been packed with gift box
Testing method: Drop the unit from a height of 91cm onto floor, from the angles of the 4 corners and the
6 sides of the box (1 time for each side)
Result: no content escape from packaging.
Item 7.5: Temperature / Humidity Test
7.4.1 Non-operating temperature/humidity cycle test
Storage at the following conditions:
1)65 degrees Celsius / 95% RH (24hrs)
2)65 degrees Celsius / 10% RH (24hrs)
3) –20 degrees Celsius (24hrs)
7.4.2 Operating temperature / humidity test
Performed dynamic burn-in at the following conditions:
1)45 degrees Celsius / 80%RH (8hrs)
2)45 degrees Celsius / 10%RH (8hrs)
3)0 degrees Celsius (8hrs)
Item 7.6: Heat Cycle Test for Shipment Pattern
Condition: N/A
Testing method: -40 degrees Celsius to 65 degrees Celsius under 0% to 90% relative humidity with total
time of 40 hours, and then left under room temperature for 2 hours.
Result:The unit work properly
Item 7.7: Vibration Test
Unit shall survive a vibration within a frequency range of 10 to 200Hz at 0.015 square of g/Hz and 200
to 500 Hz at –6dB/oct for X,Y,and Z axis and 0.5 hour per axis.
Part 8.0: Product Compliance
Item8.1:ActualComplianceLabel
Mouse :
DR： Sam CHECK： APPD：