User's Manual

16 Managing Your Contact List
Managing Your Contact List
Add a contact
1 Make sure you are logged in to your SightSpeed account.
2 From the Main Menu or Video Conferencing screen, select Contacts.
3 Select Add.
4 Press the OK button to enter your contact’s User ID.
5 Using the keypad, enter your contact’s SightSpeed ID (not your contact’s email address).
6 After editing, press the OK button again.
If you do not want to associate a display name and photo with your contact, skip to step 12 below.
7 Highlight Display Name.
8 Following the method described from steps 4 to 6 above, enter the display name for your contact.
9 Highlight Photo and press the OK button .
10 Highlight the photo you want.
11 Select Next.
12 Select Save.
Edit your contact’s details
1 Make sure you are logged in to your SightSpeed account.
2 From the Main Menu or Video Conferencing screen, select Contacts.
3 Highlight the contact you want.
4 Select Edit.
5 Highlight the information you want to edit (User ID cannot be edited).
6 Press the OK button .
7 Using the keypad, edit your contact’s details.
8 After editing, press the OK button again.
FatPipe_CES_2_samples.fm Page 16 Friday, November 23, 2007 2:11 PM