User's Manual

Contents

Mini-USB Port

MicroSD Card Slot

See

Inserting and Removing a microSD card.

LED

Turns on when charging.

Turns off when fully charged.

Stereo Speakers

Camera

Volume

Press + or – to adjust the volume.

Function Buttons

See

Function Buttons.

Power Adapter Jack

Connects to a power outlet for charging.

Charging

Before you turn on your device for the first time, charge it from a wall socket with the use

of the included power adapter. Initial charging may take up to 6 hours. The LED is

turned on while your device is charging. When the battery is full, the LED turns off.

Assembling the Power Adapter

If there are several plug heads available, select one that matches your wall socket.

Mount the plug head onto the power adapter base until it locks in place. Note that the

plug head must be inserted approximately at the same angle as shown in the figure

below. After locking, make sure that it is firmly secured.

file:///D|/Madcap%20Flare/Ruby%20HTML%20Help/Outp...eda/MyWebHelp/Content/Resources/HTMs/Contents.htm (4 of 21)10/20/2010 12:35:53 PM