User's Manual

Foxlink Confidential and Proprietary
Documents Title Rev V0.5
Date 2009/8/4
OPTIMA 2 BT Dongle User Spec
Page 2/5
Revision History
Rev. Date Author Reason for Changes
0.1 2009/4/16 Andy Lu Initial draft
0.2
2009/4/23 Andy Lu Add “page device time out” to the flowchart
Modify “pairing” to “paging device list”
0.3 2009/4/27
Andy Lu 1. Change in button function “After press 7s or more, dongle will
clear the device list. The dongle will enter into pairing mode
automatically.”
2. Refer to "Page device" in the flow chart, please add "N<=
5min" beside "Fail".
3. add “clean disconnect” explanation on “Q & A”
0.4 2009/4/27
Andy Lu 1. modify the function 4.9 to dongle will go to pairing device
automatically after cleaning device list
2. Add “Dongle doesn't try to re-connect to speaker, if it is a clean
disconnect.” to appendix #3
0.4 2009/8/4
Frank Feng 1. Change LED blinking pattern to make the distinction of
different states more obvious