User's Manual

1. Ensure the Main unit and Subwoofer are placed within 3 metre for the setup process.

2. Ensure mains power is connected and switched on.

3. Power on the Main unit by pressing the power ( ) button. The boot up process may take around a minute.

4. Connect the link cable (bundled with the subwoofer) between the main unit and the subwoofer. On the Main unit,

the cable should be plugged into the Sub-Out connector. On the Subwoofer, the other end of the cable should be

plugged into the In connector.

Setting Up the Wireless Subwoofer Connection

5. Press and hold the “ ” button until the main display shows a “Waitingforsubwooferconnection” message is

shown. Upon successful setup, a message indicating “SubwooferConnected” would be displayed.