User Manual

8
9
Link discoverable mode
Rapid blinking LED
Link established with Master Speaker
LED lit steady
3
To link up with the ZiiSound D5x or D3x
To link to the ZiiSound D5x or D3x master speaker unit, the ZiiSound DSx needs to be in LINK
Discoverable mode for the master speaker unit to establish a link to ZiiSound DSx. To activate LINK
discoverable mode, follow the instructions below.
With the Subwoofer mains powered ON, press and hold the Link button for 4 Seconds until the
LED is blinking rapidly. Subwoofer is now ready to receive connection from a master speaker unit.
A
When the Wireless Subwoofer is successfully linked up, the Led Status indicator will be lit steady.
B
Note: At any one time, the ZiiSound DSx can only remember one device in its memory bank.
Return to Factory default
Two Led Flashes and Led stops blinking
LINK discoverable mode
Rapid blinking LED
4
To de-link the ZiiSound DSx from any master speaker unit
To de-link the ZiiSound DSx from any master speaker unit for linking to another master speaker unit,
perform the following instructions below.
With the Subwoofer is powered ON, press and hold the Link button for 10 Seconds until 2
flashes of LED is seen and the LED stops blinking. Subwoofer is cleared of memory and in
standby mode.
A
Press and hold the Link button for 4 Seconds until the LED is rapidly blinking. Subwoofer is
ready to receive connection from another master speaker unit.
B