User's Guide
使用产品前请阅读使用说明
TRUE WIRELESS SWEATPROOF IN-EARS
真无线防水入耳耳机
真無線防水入耳耳機
QUICK START QUIDE
快速入门指南
快速入門指南
Creative True Wireless Stereo Earbuds: Common connectivity issues
SUMMARY:
This article highlights a phenomena and recommendation for music cuting out
and ear buds that do not stay connected.
When pairing a smart mobile device with TWS (True Wireless Stereo) ear buds,
the signal is strongest when there is a line-of-sight between the pairing devices.
If the signal passes through the body, which is mostly made up of water uid,
it may get absorbed, which may result in pairing diculty. If the mobile device
is already connected to the TWS ear buds, it may result in signal lost or the ear
buds may get disconnected.
Therefore, it is recommended to place the smart mobile device on the
same side as the main connected ear bud; thereby bypassing the body
barrier. For example, left ear bud is paired as the main connected ear
bud, the smart mobile device should be placed in the left pocket of your
pants and vice versa.
2. Controls
v) Earbuds O
3s 3s
Note: When a long press is initiated, earbud will rst
enter Bluetooth Pairing Mode before turning o. Each
earbud will need to be turned o manually.
iv) Earbuds On (Bluetooth Disconnected)
2s 2s
5s 5s
Siri Google Assistant
ii) Pause Mode
x3
2s 2s
x3
5s 5s
Ambient Mode
iii) Call Mode
2s 2s
i) Playback Mode
x2x2
Ambient Mode
x2x2
x3x3
Ambient Mode
x2x2
3. Earbuds Fit Guide
Gently push and wiggle the earbuds into the respective ear canals until a good
seal is made to ensure proper tting
1. 3.2. 4.
4. Master Reset
5s
Earbuds will ash once in blue in charging case when Master Reset is complete.
Master Reset is reserved for cases where users encounter issues while earbuds are
in use or during situations such as: Bluetooth Pairing failure, random LED ashing,
failure to pair secondary earbud with the main earbud, or to reset all data
Technical Specications
Headphones drivers
• 5.6 mm Graphene-enhanced Driver
• Frequency Response: 20–20,000 Hz
Microphones
• Type: Omni-directional x4
• Frequency Response: 100–10,000 Hz
• Sensitivity (1 kHz): -42 dBV / Pa
Interface
• USB Type-C (charging), Bluetooth 5.0
Bluetooth proles
• A2DP (Wireless stereo Bluetooth)
• AVRCP (Bluetooth remote control)
• HFP (Hands-free prole)
Wireless operating range
• Up to 100m
• RF Output Power: < 20 dBm
• Operating Frequency: 2402–2480 MHz
Battery
• Earpiece (Left and Right)
Lithium-ion polymer battery:
3.7V 80 mAh 0.296 Wh
• Battery charging case
Lithium-ion polymer battery:
3.7V 900 mAh 3.33 Wh
Input: 5V 1A
Total play time
• Up to xx hours
Charging time
• 1–2 hours
Audio codec
• SBC, aptX
™
, AAC
Operating temperature
• 0–45°C
Note: Compliance markings are located at the bottom of the product
Please visit creative.com/compliance/outliergoldv2 for the user guide, safety
and regulatory information, ErP information where applicable and battery removal
instruction which is meant strictly for independently qualied professional.
Please visit creative.com/support/outliergoldv2 for all other support related to
your product.
Bluetooth
Serial Number / Numéro de série / Seriennummer / Número de Série / Sériové číslo / Numer
seryjny / Серийный номер / número de série / Numero di serie / Serienummer / Número de série
/ Serienummer / Sarjanumero / Serienummer / Serienummer / Sériové číslo / σειριακός αριθμός
LANGUAGE
1. Overview 3. Earbuds Fit Guide
4. Master Reset
Technical Specications
Headphones drivers
• 5.6 mm Graphene-enhanced Driver
• Frequency Response: 20–20,000 Hz
Microphones
• Type: Omni-directional x4
• Frequency Response: 100–10,000 Hz
• Sensitivity (1 kHz): -42 dBV / Pa
Interface
• USB Type-C (charging), Bluetooth 5.0
a) Charging Case Battery Indicator
i) Charging Indicator
Charging – Glowing Red
Fully charge – Solid Green
ii) Battery Level
Low – Red
Medium –Yellow
High – Green
b) Left Earbud Charging Indicator
c) Right Earbud Charging Indicator
iii) Earbuds Charging Indicator
Charging – Glowing Red
Optimally Charged – Solid Green
Fully Charge – LED O
d) USB-C Charging Port
e) Earbud LED Indicator
iv) Slow Blinking Blue – Disconnected
v) Flashing Red / Blue – Bluetooth Pairing
vi) Glowing Red (In Charging Case) –
Charging
Gently push and wiggle the earbuds into
the respective ear canals until a good
seal is made to ensure proper tting
Earbuds will ash once in blue in
charging case when Master Reset is
complete. Master Reset is reserved for
cases where users encounter issues
while earbuds are in use or during
situations such as: Bluetooth Pairing
failure, random LED ashing, failure to
pair secondary earbud with the main
earbud, or to reset all data
2. Controls
i) Playback Mode
ii) Pause Mode
iii) Call Mode
iv) Earbuds On (Bluetooth Disconnected)
Note: When a long press is initiated, earbud
will rst enter Bluetooth Pairing Mode
before turning o. Each earbud will need to
be turned o manually.
v) Earbuds O
Note: Compliance markings are located at the
bottom of the product
Bluetooth proles
• A2DP (Wireless stereo Bluetooth)
• AVRCP (Bluetooth remote control)
• HFP (Hands-free prole)
Wireless operating range
• Up to 100m
• RF Output Power: < 20 dBm
• Operating Frequency:
2402–2480 MHz
Battery
• Earpiece (Left and Right)
Lithium-ion polymer battery:
3.7V 60 mAh 0.222 Wh
• Battery charging case
Lithium-ion polymer battery:
3.7V 450 mAh 1.665 Wh
Input: 5V 1A
Total play time
• Up to xx hours
Charging time
• 1–2 hours
Audio codec
• SBC, aptX
™
, AAC
Operating temperature
• 0–45°C
Creative True Wireless Stereo Earbuds:
Common connectivity issues
SUMMARY:
This article highlights a phenomena and
recommendation for music cuting out and ear
buds that do not stay connected.
When pairing a smart mobile device with TWS
(True Wireless Stereo) ear buds, the signal is
strongest when there is a line-of-sight between
the pairing devices.
If the signal passes through the body, which
is mostly made up of water uid, it may get
absorbed, which may result in pairing diculty.
If the mobile device is already connected to the
TWS ear buds, it may result in signal lost or the
ear buds may get disconnected.
Therefore, it is recommended to place the
smart mobile device on the same side as the
main connected ear bud; thereby bypassing
the body barrier. For example, left ear bud
is paired as the main connected ear bud, the
smart mobile device should be placed in the
left pocket of your pants and vice versa.
Please visit creative.com/compliance/
outliergoldv2 for the user guide, safety and
regulatory information, ErP information where
applicable and battery removal instruction
which is meant strictly for independently
qualied professional.
Please visit creative.com/support/
outliergoldv2 for all other support related to
your product.
1. Overview
a
b
Left Earbud Charging Indicator
d
USB-C Charging
Port
c
Right Earbud Charging Indicator
Charging Case Battery Indicator
Glowing Red
Solid Green
Charging
Fully charged
i) Charging Indicator
Glowing Red
Solid Green
LED O
Charging
Optimally Charged
Fully Charged
iii) Earbuds Charging Indicator
Red
Yellow
Green
Low
Medium
High
ii) Battery Level
e
Earbud LED Indicator
Bluetooth
Pairing
Disconnectediv) Slow Blinking
Blue
v) Flashing
Red / Blue
Chargingvi) Glowing Red
(In Charging Case)