User's Manual

2
Bluetooth Version Bluetooth 2.1 + EDR (Enhanced Data Rate)
Operating Frequency 2402 -2480MHz
Supported
Bluetooth profiles A2DP (Wireless Stereo Bluetooth ), AVRCP
Supported Codec FastStream, apt-X
®
and SBC
Operating Range Up to 10 meters, measured in open space. Walls and
structures may affect range of device.
Product Operating Temperature Range 0˚C to 45˚C
Technical Specifications
Compatibility disclaimer: Wireless performance is dependent on your device’s Bluetooth wireless technology.
Refer to your device manufacturer’s manual.
Creative will not be liable for any lost of data or leakages resulting from the use of these devices.
The BT-W1 is powered directly by your computer USB port (5VDC, 500mA).
After the BT-W1 has been paired to a device, it will always attempt to reconnect to the previously
paired device when the BT-W1 is plugged into a USB port. Always ensure that the receiving device has
its
Bluetooth enabled and ready to accept connections. You may also try the following.
a) Ensure that the receiving device has its
Bluetooth enabled and ready to accept connections
b1) Plug out and plug in your BT-W1 from the computer and wait for it to auto connect
Or
b2) With the BT-W1 in the computer USB port, press the button on the BT-W1 to initiate a
connection to your device.
Note: The BT-W1 will stream any audio (including startup, shutdown or warning tones) played from your computer. Ensure that the
volume is kept to a comfortable level.
To reconnect to a previously paired device
To disconnect from the BT-W1
To stop streaming music from the BT-W1 to your receiving Bluetooth device, simply either plug out
the BT-W1 or press the button once. Pressing another time will reconnect the BT-W1 back to last
connected Bluetooth device.