User's Manual

 buttonfor2secondsandrelease.
• Notethatfeaturessuchasvoicedial,lastnumber
redial or three-way call are phone dependent.
Clear or reset headset
• PressandholdtheVolumeDown“-”andMultifunction
buttons for more than 6 seconds to clear the paired
Bluetooth devices
• Iftheheadsetmalfunctions,resetitbysupplyingUSB
 power,thenpresstheVolumeUp“+”andMultifunction
 buttonsforabout1second
Automatic shutdown
• Once the headset is powered on, if it is unable to
connect to the last paired device or failed to pair with a
 new device within 5 minutes, the headset will
automatically shut down.
List of button, indicator and connector / port functions
Button Function
1.
Multifunction
(Power /
Pair / Call)
Power:Pressandholdfor2secondsto
power on the headset. Press and hold
for 3 seconds to power off the headset.
Pair: In off mode, press and hold for
more than 5 seconds to activate Pairing
mode.
Call: Press and hold for 1 second to
activatevoicedial.Pressandholdfor2
seconds to redial the last called number
when no call is in progress. Press and
release to answer or end an incoming
call. Press and hold for 2 seconds to
reject a call during an incoming call.
Press twice to accept a call waiting
and put on hold the ongoing call. Press
togetherwith ‘+’buttonandrelease to
initiate a three-way call.