User's Manual
Table Of Contents
- Creative Sound Blaster Wireless Entertainment
- Contents
- Introduction
- Your Sound Blaster Wireless Entertainment At A Glance
- Getting Started
- Using Your Remote Control
- About Music Files
- Frequently Asked Questions
- Maintenance and Safety Advice
- Technical Specifications
- Glossary
- Ad-hoc mode
- Antenna
- Access Point (AP)
- Bandwidth
- BSS (Basic Service Set)
- DHCP (Dynamic Host Configuration Protocol)
- Dynamic IP address
- Encryption
- IEEE 802.11
- IEEE 802.11b
- IEEE 802.11g
- Infrastructure mode
- IP (Internet Protocol)
- IP address
- LAN (Local Area Network)
- MAC (Media Access Control) address
- Router
- SSID (Service Set Identity)
- Static IP address
- TCP/IP (Transmission Control Protocol/ Internet Protocol)
- USB (Universal Serial Bus)
- WEP (Wired Equivalent Privacy)
- Wi-Fi
Introduction 1-1
Introduction
Thank you for choosing the Creative Sound Blaster Wireless Entertainment.
Package
Contents
The following items are included in your package:
❑
Wireless MP3 Receiver
❑ Remote Control and three AA batteries
❑ Power adapter
❑ USB cable
❑ RCA-to-miniplug cable
❑ Quick Start leaflet
❑ Installation CD
Minimum
System
Requirements
❑ Microsoft
®
Windows
®
98 Second Edition (SE), Windows 2000, Windows Millennium
Edition (Me) or Windows XP
❑ Intel
®
Pentium
®
III 350MHz or equivalent
❑ 128MB RAM
❑ CD-ROM/DVD-ROM drive for software installation
❑ Available USB port for installation and configuration
❑ Installed an IEEE 802.11b or 802.11g compliant wireless LAN with a wireless router or
access point
Model
Number,
Serial
Number and
MAC Address
You will find a model number, a serial number and a MAC address on your Wireless
MP3 Receiver.
You will need to provide model and serial numbers when contacting Technical
Support. Additionally, you will need the MAC address on your Wireless MP3
Receiver if you have enabled the MAC address security feature on your wireless
LAN.